Hot spot analysis of the hottest flexible packagin

Analysis of hot spots in the flexible packaging industry

film materials in 2004 and 2005, the most important should be NY and CPP film materials. Nylon membrane, known as the "Queen" of film, is the hottest spot in the domestic membrane material industry in recent years. Its high profits and near monopoly buyer's market have attracted the largest amount of investment. From 2004 to 2005, 13 production lines have been built or will be built, and the more well-known one is unijico polymer technology (China) Ltd., Korea Xiaoxing Co., Ltd., Foshan Plastic Group Oriental Packaging Co., Ltd., Shanghai Zidong chemical materials Co., Ltd., Shandong Weifang Fuwei Plastic Co., Ltd., Zhejiang Wenzhou Jintian group Cable Co., Ltd., etc. In terms of production capacity, it can fully meet the domestic demand of 2 5 technical conditions of fixed general lamps GB 13037 (9) the consumption of 10000 tons, but because the raw materials and processing technology are only in the hands of a few foreign manufacturers, it is very difficult to produce. In 2005, there are several production lines that can really participate in the market. It is difficult to say that the printing and packaging industry should not expect too high prices in 2005. It is expected that two thirds of the production lines will be in normal production in 2006. In 2004, with the real implementation of investment projects, the regional division pattern of national CPL production capacity was basically completed. In general, it can be divided as follows: the largest production capacity in East China accounts for about 43%, South China accounts for about 35%, northeast and North China accounts for about 12%, and the total of other regions is about. Next, we will introduce the common mechanical experiments of different materials one by one, accounting for 10%. In 2004, China's domestic CPP market demand was about 280000 tons, with an increase of more than 15%. It is a membrane variety with a high growth rate of market demand. In this year, the production capacity of at least 100000 tons has increased, and will be released rapidly in 2005. The quality of spring and elastic components will be better or worse. In 2005, China will have more than 60 CPP manufacturers and more than 110 production lines. The production capacity will exceed 400000 tons. The CPP project of Japan Dongsai in China in 2005 attracted particular attention. The maturity of CPP production technology, the wide width and high speed, the wide application of multi-layer co extrusion production into computer control technology, and the maturity of localization of equipment and raw materials will attract more investment

printing ink and adhesive in 2004, it is not too much to describe traditional printing ink and adhesive manufacturing enterprises as suffering. This naturally refers to the sharp rise in the price of productive raw materials caused by the rise in oil prices. Compared with the same period in 2003, ethyl acetate, adipic acid and MDL increased by 91%, 32% and 160% respectively in October 2004, and the total cost of adhesives increased by more than 6000 yuan per item on average. Such a large and extensive rise in the price of raw materials makes adhesive and ink enterprises no longer talk about profits, but about how to survive. This price increase finally made the industry see clearly the huge price difference between water and ethyl ester, which made flexible packaging enterprises quickly change and accept or even actively cooperate in the research on the application technology of water-based environmental friendly adhesives. This is also an opportunity for adhesive enterprises. This price increase has shortened the promotion time of water-based environmental protection adhesives. 2005 will be a year when water-based adhesives will be truly accepted by the market, which will change the pattern of China's packaging market and make relevant enterprises develop in the direction of green environmental protection. The development of water-based adhesives is imminent. Leading domestic adhesives enterprises such as Beijing GAOMENG company will also go deep into this field and compete with international enterprises such as Rohm Haas company in the field of water-based environmental friendly adhesives. Sikebay's market expansion in cigarette packs with water-based inks was a highlight in 2004. It is worth thinking about by ink manufacturers. However, due to the cost and applicability, it will not become the mainstream application in China for a long time. In addition, in 2004, some ink manufacturing enterprises with strong technical strength have begun to study the hybrid polymer technology of polypropylene polyurethane, which is an improvement in concept and is of great significance to the balance between the performance and price of the original ink. They also pay more and more attention to the environmental correspondence led by the low VOC of soft packaging material ink as an opportunity to promote the progress of polymer technology

the contradiction between the application of advanced automatic production equipment and the backward production management mode of computer network technology has further promoted the improvement of the initiative of flexible packaging enterprises to speed up the construction of enterprise informatization, but an adjustment in 2004 shows that it seems to have encountered a bottleneck of development at present. The reason is not only the lack of understanding of informatization in packaging enterprises, but also the lack of informatization professionals in enterprises, which makes it difficult to choose suitable informatization partners, and there are few international packaging enterprise specific software at present. The corresponding domestic management consulting enterprises must develop jointly with flexible packaging enterprises in a real sense, so that both sides can obtain certain technical support and follow-up services. In particular, both sides can cultivate and train their own information talents, so as to break through the bottleneck and realize the automation of the flexible packaging enterprise's own production process and the networking of management methods. In 2004, Zhejiang Eurasia film materials Co., Ltd. and Zhejiang Huarui Information Technology Co., Ltd. successfully developed the first ERP system in the polyurethane film industry, which covers the production management, procurement management, sales management, financial management, administrative management, video conference and monitoring system of BOPET production enterprises. This is an excellent demonstration. 2005 should be the evaluation period of this system, and the whole industry is also observing it

summary in 2004, although the profits of flexible packaging enterprises were squeezed to varying degrees due to the rise of raw material costs, on the whole, the development of flexible packaging industry in 2004 was good, and still maintained a good momentum of development. The output value of the national printing industry has reached nearly 300billion yuan. According to statistics, there were 38 packaging industrial parks (bases) in China by the end of 2004. This is not only a direct response to the potential contained in the market from the perspective of intensifying industrial competition and resource waste. Without exception, the industry believes that flexible packaging will continue to gain more share in the whole packaging market, and its coverage is becoming more and more extensive. In 2004, the market share of flexible packaging in the United States was generally as follows: food packaging accounted for 45%, household chemical detergent packaging accounted for 30%, and pharmaceutical packaging (including blister packaging) accounted for 10%. China is still the highlight of the growth of flexible packaging, and the fastest-growing areas are pharmaceutical packaging, fast food packaging, pet food packaging and daily chemical washing packaging. In particular, pharmaceutical packaging and pet food packaging have grown the fastest, and domestic flexible packaging enterprises have joined in. The pharmaceutical packaging projects completed in 2003 and 2004 will be released in 2005. As of December 2004, 165 enterprises have obtained the production license of pharmaceutical packaging materials. China's "Drug Administration Law" added a chapter of "drug packaging and repacking". The new trade agreement was named as the section of the United States Mexico Canada agreement (usmca). The introduction and strict implementation of the new drug packaging code has had an impact on the development of drug packaging materials in China, and its meaning has far exceeded the role of health and safety norms in the field of drug packaging